Hubs
$169.99
- Produced by one of Japan's oldest hub makers
- Silky smooth Japanese sealed cartridge bearings
- High polished finish
- Choose fixed/free or fixed/fixed flip-flop rear hub
- Hub spacing: 120mm OLD
$34.00
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
$32.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling.
- Internal O-rings and grease sleeve
- High quality, sealed Cup & Cone Bearing
- High durability and smooth rolling for sustained performance
$144.99
Shimano Alfine Center Lock Dynamo Front Hub
- Compatible with 26 to 28-inch wheel sizes
- Light alloy QR lever and nut
- 6V, 3.0W output
- Centerlock rotor mount
- Spoke Interface: J-Bend
- Weight: 575g
$459.99
Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub.
- Center Lock Disc Rotor Compatible
$31.99
The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts.
- Double contact sealing
- Super polished bearing races for low friction rolling
- 6-bolt ISO disc mounting surface
$57.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-less 15mm thru axle system optimizes rigidity and weight
- Simple setup and reliable trail performance
$191.99 - $196.99
Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.
- Weight: 313 grams
$45.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-free 15mm thru axle system is stiff and lightweight
- Simple setup and reliable trail performance
$179.99
Built with labyrinth and contact seals to remain silky smooth in dusty, muddy, wet, and sandy conditions, and with highly refined cup and cone surfaces, the XTR front hub is perfect for custom MTB wheel builds.
- Traditional flange
$90.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Fully convertible with tool-free end caps
- 24, 28 or 32 spoke holes
$225.00
Whether the goal is a finish line, epic adventure or simply getting back home again, our new 900 hubs are ready for the challenge. On the inside, our smooth and durable DOUBLE TIME drive mechanism ensures rapid lightning-fast engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Includes Quick Release & 12x142mm Through AxleCaps
- Fully convertible with tool free end caps
- DOUBLE TIME mechanism offers smooth,quick and durable engagement
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Axle type: Conversion Caps included
- Spoke holes: 24
- Brake compatibility: Disc (6-bolt)
- Driver Mechanism: Double Time - Four Pawl
- Axle material: Tapered aluminum
- Driver body material: Aluminum
- Hub shell: Aluminum - Seeker angled flanges - Oversized body
$225.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Fully convertible with tool-free end caps
- BOOST variants
- 24, 28 or 32 spoke holes
$92.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
$89.99
- eMTB rated with steel axles
- 6902 cartridge bearings and robust 10 degree engagement
- 32h spoke count
- For J-Bend spokes only
$219.99
- Tough on trail and light on price rated for everything from XC to Enduro and E-bike
- Steel axles cartridge bearings robust alloy hub shell and steel cassette body
- 10-degree pawl engagement
- International Standard 6-bolt disc mount
- *Shimano/SRAM
$219.99
- An oversized hub shell increases torsional and lateral stiffness
- 6902 bearings for maximum durability
- Wide bearing placement was designed to decrease load on the bearings
- Low-drag labyrinth seals
- Tool-free endcaps
- Torque-cap compatible
- Includes standard 15mm end-caps only, Torque must be purchased separately
$379.99
At the Center of It All
Cast your eyes upon your new favorite component, the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery-fast speed by way of solid, smart design.
Power To The Pedal
Let's add it up: a 60-tooth drive ring, 6 pawls, acting in 2 groups of 3, for 120 points of engagement. The result– almost instant transfer of power.
Overbuilt But Not Overkill
With this hub, bigger is better. An oversized hub shell ads stiffness and stability while large and in-charge 6902 bearings perform for the long run.
$196.99
- Elite Series convertible cyclocross/gravel hubs
- Available in multiple axle configurations
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Use: Front Hub
- Bearing: Sealed
- Drilling: 28H
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- OLD: 100mm
J-Bend Spoke:
- PCD-L: 58mm
- PCD-R: 45mm
- LTF-L: 27.65mm
- LTF-R: 15.35mm
- CTF-L: 22.35mm
- CTF-R: 34.65mm
Straight Pull Spoke:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 31.4mm
- LTF-R: 19.6mm
- CTF-L: 18.6mm
- CTF-R: 30.4mm
$92.79 - $132.19
- Aluminum hub
- Sealed bearing
- Black
- 6-bolt disc brake rotor mount
$129.99 - $158.59
- Aluminum hubs
- Sealed bearing
- Black
- 6-bolt disc rotor
$165.99
- Elite Series convertible fat bike hubs
- Available in multiple axle configurations
- J-bend spoke compatible
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Bearing: Sealed
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 27.65mm
Quick Release:
- Weight: 246g
- LTF-R: 24.85mm
- CTF-L: 39.85mm
- CTF-R: 42.65mm
15mm Thru-Axle:
- Weight: 256g
- LTF-R: 27.65mm
- CTF-L: 47.35mm
- CTF-R: 47.35mm
$259.99 - $269.99
- Elite Series convertible fat bike hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement
- J-bend spoke compatible
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- PCD-L: 58mm
- PCD-R: 58mm
Quick-Release:
- LTF-L: 48.65mm
- LTF-R: 48.65mm
- CTF-L: 36.5mm
- CTF-R: 36.5mm
12mm Thru-Axle:
- LTF-L: 52.15mm
- LTF-R: 52.15mm
- CTF-L: 46.5mm
- CTF-R: 46.5mm
$39.99
- Aluminum hubs
- Loose ball
- Bolt-on
- Axle: B/O 3/8
- Material: Aly
- Color: Blk
- Brake Type: 6B
- OLD: 135mm
$47.65 - $52.99
- Aluminum hubs
- Loose ball
- Bolt-on
- Axle: B/O 3/8
- Material: Aly
- Color: Blk
- Brake Type: 6B
- OLD: 170mm
$196.99
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement
- Straight pull and J-bend spoke options
- 6-bolt disc brake rotor compatible
- Sealed bearings
J-Bend SPECIFICATIONS
- OLD: 110mm
- Left Flange Diameter: 58mm
- Right Flange Diameter: 45mm
- Left Locknut-To-Flange: 27.05mm
- Right Locknut-To-Flange: 15.05mm
- Left Center-To-Flange: 27.95mm
- Right Center-To-Flange: 39.95mm
Straight-Pull SPECIFICATIONS
- OLD: 110mm
- Left Flange Diameter: 55mm
- Right Flange Diameter: 55mm
- Left Locknut-To-Flange: 31.5mm
- Right Locknut-To-Flange: 19.5mm
- Left Center-To-Flange: 23.5mm
- Right Center-To-Flange: 35.5mm
$165.99 - $196.99
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
- Wt: 180g
J-Bend:
- PCD-L: 58mm
- PCD-R: 45mm
- LTF-L: 27.65mm
- LTF-R: 15.35mm
- CTF-L: 22.35mm
- CTF-R: 34.65mm
Straight Pull:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 31.4mm
- LTF-R: 19.6mm
- CTF-L: 18.6mm
- CTF-R: 30.4mm
$299.99
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6-degree engagement
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
J-Bend/QR:
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 32.95mm
- LTF-R: 48.45mm
- CTF-L: 34.7mm
- CTF-R: 19.2mm
J-Bend/142 x 12mm:
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 36.45mm
- LTF-R: 51.95mm
- CTF-L: 34.7mm
- CTF-R: 19.2mm
Straight Pull/QR:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 36.2mm
- LTF-R: 50.1mm
- CTF-L: 31.45mm
- CTF-R: 17.55mm
Straight Pull/142 x 12mm:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 39.7mm
- LTF-R: 53.6mm
- CTF-L: 31.45mm
- CTF-R: 17.55mm
$63.35 - $70.99
- Aluminum hub body
- Sealed bearings
- 100mm OLD
- 6-bolt disc rotor mount
$83.55 - $92.79
- Forged aluminum construction
- Sealed Cartridge bearings
- Double contact seals
- 6-bolt disc rotor compatible
- 8/10-speed cassette compatibility
- Quick-release
- 135mm hub spacing
Page 1 of 4
Next page